Battery DH200F S000L01 - PCS- ongrid/offgrid, No MPPT

DH200F S000L01 is a high-efficiency inverter for solar systems with the ability to work both in grid and autonomous mode (ongrid/offgrid). This model does not have a built-in MPPT (Maximum Power Point Tracking) controller, making it suitable for systems that do not require optimization of energy production from solar panels. The device is reliable and suitable for a variety of applications, providing a stable power supply

Features:
Battery type: Lithium iron phosphate ( LiFePO4 )
Battery capacity: 280Ah
Single module battery configuration: 1P16S
Number of packages: One cluster/15 modules
Battery voltage range: 672~864V
Rated Current: 140A（0.5C）
Maximum current: 150A
System storage capacity: 215kWh
Charge/discharge cycles: <6000

Mains AC specification parameters : Applicable to all models
Nominal power: 100kW
Rated AC voltage: 400V
Wiring method: 3P4L+PE
Frequency: 50Hz
Maximum AC current: 158A
The maximum number of BESS units in parallel is: 12

Specification of off-grid AC parameters:
Only applicable to models S150L01, S100L01, S000L01
Rated power: 100kW
Rated AC voltage: 400V
Wiring method: 3P4L+PE
Frequency: 50Hz
Maximum AC current: 158A
Unbalanced load capacity: 100%
Network to network switching time: ＜20ms
Switching time from off-grid to on-grid: ＜20ms
The maximum number of BESS units in parallel is: 5

PV Access: Applicable to all models, ""S"" followed by a number represents PV
power. For example, S150L00 shows a 3-channel MPPT with a power of 150 kW.
Input voltage: 200-670V
Number of MPPT paths: 0~3

Note that in the installation of any site, regardless of the inverters, if a connection between the battery and the solar plant is required, an additional EMS or BMS is required.